Physical or Chemical Change? - River Dell Regional School ...
Chemical Properties & Physical and Chemical Changes Physical changes are those changes that do not result in the production of a new substance. If you melt a block of ice, you still have H2O at the end of the
change. If you break a bottle, you still have glass. Painting your nails will not stop them from being fingernails. Some common examples of physical changes are: melting, freezing, condensing, breaking, crushing, cutting, and bending.
Some, but not all physical changes can be reversed. You could refreeze the water into ice, but you cannot put your hair back together if you dont like your haircut! Special types of physical changes where any object changes state, such as when water freezes or evaporates, are sometimes called change of state operations.
CHEMICAL PROPERTIES Chemical properties can ONLY be observed AS the substances are changing into different substances. Chemical changes, or chemical reactions, are changes that result in the production of another substance.
FLAMMABILITY: A materials ability to BURN in the presence of OXYGEN REACTIVITY: How readily (easily) a substance combines chemically with other substances. Which has higher reactivity? A 14 karat gold ring or a cheap metal ring from the
vending machine at the grocery store? What is your evidence? When you burn a log in a fireplace, you are carrying out a chemical reaction that releases carbon. When you light your Bunsen burner in lab, you are carrying out a chemical reaction that produces water and carbon dioxide.
Common examples of chemical changes that you may be somewhat familiar with are; digestion, respiration, photosynthesis, burning, and decomposition. Physical or Chemical Change? Painting Wood
PHYSICAL Physical or Chemical Change? Burning Paper CHEMICAL Physical or Chemical Change? Digestion of food CHEMICAL
Physical or Chemical Change? Sugar dissolving in water PHYSICAL Physical or Chemical Change? Iron turning red when heated
PHYSICAL Physical or Chemical Change? Evaporation PHYSICAL Physical or Chemical Change? A pond freezing in winter
PHYSICAL Physical or Chemical Change? Melting ice PHYSICAL Physical or Chemical Change? Cutting wire PHYSICAL
Physical or Chemical Change? Painting fingernails PHYSICAL Physical or Chemical Change? Cutting fabric PHYSICAL
Physical or Chemical Change? Baking muffins CHEMICAL Physical or Chemical Change? Shattering glass PHYSICAL Physical or Chemical Change?
Decomposition of old leaves CHEMICAL Physical or Chemical Change? Wrinkling a shirt PHYSICAL Physical or Chemical Change?
An old nail rusting CHEMICAL PHYSICAL Properties - characteristics that can be observed or measured without changing the composition - Ex. Breaking a glass, dying your hair - Color, density, odor, taste, melting, freezing & boiling point, magnetism, solubility
Some, but not all physical changes can be reversed. You could refreeze the water into ice, but you cannot put your hair back together if you dont like your haircut! Classify each statement as physical or chemical property/change. 1. Pure metals have a higher luster (are shiny and reflect light). 2. The surfaces of some metals become dull when exposed to air.
3. Nitrogen gas, a relatively nonreactive material at room 4. 5. 6. 7. 8. 9. temperature, can form nitrogen oxides at the high temperatures of an operating automobile engine. Milk turns sour if left too long at room temperature.
Diamonds are hard enough to be used as a coating for drill bits. Leavened bread dough increases in volume if it allowed to rise before baking. Generally, metals are better conductors of heat and electricity than are nonmetals. Unreactive argon gas, rather than air, is used to fill many light bulbs to prevent the metal filament wire inside the bulb from being destroyed through chemical reactions. Metals are typically ductile (can be drawn into wires). Classify each statement as physical or chemical property/change.
1. Pure metals have a higher luster (are shiny and reflect light). P 2. The surfaces of some metals become dull when exposed to air. C 3. Nitrogen gas, a relatively nonreactive material at room 4. 5. 6. 7. 8. 9.
temperature, can form nitrogen oxides at the high temperatures of an operating automobile engine. C Milk turns sour if left too long at room temperature. C Diamonds are hard enough to be used as a coating for drill bits. P Leavened bread dough increases in volume if it allowed to rise before baking. C Generally, metals are better conductors of heat and electricity than are nonmetals. P Unreactive argon gas, rather than air, is used to fill many light
bulbs to prevent the metal filament wire inside the bulb from being destroyed through chemical reactions. C Metals are typically ductile (can be drawn into wires). P Real Life Problem: Designing the Penny COST of materials is an issue when manufacturing coins and paper money. Early 1980s copper became too expensive to be used as primary metal in pennies Zinc replaced most of the copper in all post 1982 pennies PROs - Zinc about as hard; almost as dense, readily
available and less expensive than copper CONs more chemically reactive (zinc-plated steel pennies created in 1943 corroded and looked considerably different) Solved the penny issue in early 1980s Copper properties best fit for outside of the coin and zinc properties best fit for inside of the coin (increase coins durability and maintain familiar appearance)
PHYSICAL Changes CHEMICAL Changes - changes that alter a substances - chemical reactions appearance without changing - process that involves 1 or more its composition substances changing into new
with oxygen, ferments, burns, rots http:// vital.cs.ohiou. edu/ steamwebsite /downloads/ What is Density? If you take the same volume of different substances, then they will weigh different amounts.
Wood 1 cm3 0.50 g Water 1 cm3 1.00 g Iron
1 cm3 8.00 g IRON Q) Which has the greatest mass and therefore the most dense? Density is the Mass per unit Volume http://www.youtube.com/watch?
Density Equation: g Density = g/mL or g/cm-3 M=DxV V=M/D mass
Volume mL (for liquids) or cm3 (for solids) http://science360.gov/obj/ video/f2511bad-b43f-4dbd84f9-ace57941ac90/massvolume-density NHL Hockey Rinks DENSITY OF A REGULAR SOLID 1. Find the Mass of
m = 240 g 2.0 cm 3.0 cm = m = 240 =10.0 g/cm3 V 24 the solid on a balance.
2. Measure the three lengths and calculate the Volume. (ie V = l x w x h ) Calculate the 4.0 cm Density. DENSITY OF AN IRREGULAR
SOLID m = 360 g 80 ml 50 ml 1. Find the Mass of the solid on a balance. 2. Fill the Measuring Cylinder with Water to a known Volume. 3. Add the Object.
4. Work out the Volume of Water that is displaced. 5. Calculate the Density. 3 Density = m = 360 =12.0 g/cm V 30 DENSITY OF AN IRREGULAR SOLID OR use a Eureka (overflow) Can to find the Volume.
m = 440 g 40.0 ml 1. Find the mass of the solid on a balance. 2. Add water until just overflowing. 3. Place a Measuring Cylinder under the spout.
4. Add the Object. 5. Collect the Water and read Density = m = 440 =11.0 g/cm3 V 40 off the Volume. DENSITY OF A LIQUID 1. Find the Mass of an empty
graduated cylinder. 2. Add a certain Volume of Liquid. 3. Find the Mass of the Measuring Cylinder and Liquid 4. Calculate the Mass of Liquid. 25.0 g How? 25.0 g 45.0
1. Mass of Liquid = Mass of Measuring 20.0 ml Cylinder and Liquid Mass of empty Measuring Cylinder 2. Calculate Density of Liquid. 45 25 = 20 g Density = m = 20 =1.00 g/mL
V 20 Density Practice Problems 1. What is the density of a piece of wood that has a mass of 25.0 grams and a volume of 29.4 cm3? Density = m V D = 25.0g 29.4cm3
D = 0.85g/cm3 2. A piece of wood that measures 3.0cm by 6.0cm by 4.0 cm has a mass of 80.0 grams. What is the density of the wood? Volume = l x w x h Density = m V V = 3.0cm x 6.0cm x 4.0cm V = 72.0cm3 m = 80.0g
D = 80.0g 72.0cm3 D = 0.85g/cm3 3. Would the piece of wood in #2 float in water? Yes, the woods density is less than the density of water (1.0g/cm 3) 4. An ice cube measuring 5.80cm by 5.80cm by 5.80cm has a density of 0.917g/cm3. What is the mass? Volume = l x w x h
Density = m V m=DxV V = 5.8cm x 5.8cm x 5.8cm V = 195.11cm3 D = 0.917g/cm3 m = 0.917g/cm3 x 195.11cm3 m = 178.92g 5. The density of aluminum is 2.7g/ml. If the mass of a
piece of aluminum is 244g, what is the volume of the aluminum? V = 244g D=m V V=m D D = 2.7g/ml m = 244g
2.7g/ml V = 90.37ml How to TEST for GASSES! Oxygen (O2), Hydrogen (H2) & Carbon Dioxide (CO2) colorless and odorless (for the most part). SOOO how can you tell which gas is emitted after a chemical reaction????? http://www.youtube.com/watch?
The Cone Gatherers Robin Jenkins The period Second World War ( 1939-45) There are many references to the war in the novel ; Captain Forgan is back from the war, the forestry workers from Ardmore are conscientious objectors; Tulloch's brother...
The Widower -- Luke Fildes, Art Gallery of New South Wales, Sydney, Australia. He drew me up from the desolate pit, out of the miry bog, and set my feet upon a rock, making my steps secure. ... He first...
Their size: broadsheet size (most common), tabloid size (National Enquirer) What geographic areas they cover: national, , state, local. Whom they are intended to target: Wall Street Journal, The Atlanta Voice. Types of Publications. Types of Magazines.
Starting in the back half of 2011 the final cycle turns down(6-year) This is the first time since the depression of the late1800's that all economic Kress cycles turn down together. This does not bode well for the economy over...
1/ Exceptional financing brings together financial arrangements made by the authorities (or other sectors fostered by the authorities) of an economy to meet balance of payments needs. For more detailed see . BPM6, Appendix 1, paragraph A1.4. Eurostat
Ready to download the document? Go ahead and hit continue!