Chapter 6 Work and Energy 2014 Pearson Education, Inc. Contents of Chapter 6

Work Done by a Constant Force Work Done by a Varying Force Kinetic Energy, and the Work-Energy Principle Potential Energy Conservative and Nonconservative Forces Mechanical Energy and Its Conservation Problem Solving Using Conservation of Mechanical Energy

2014 Pearson Education, Inc. Contents of Chapter 6 Other Forms of Energy and Energy Transformations; the Law of Conservation of Energy Energy Conservation with Dissipative Forces: Solving Problems Power 2014 Pearson Education, Inc.

6-1 Work Done by a Constant Force The work done by a constant force is defined as the distance moved multiplied by the component of the force in the direction of displacement: (6-1) 2014 Pearson Education, Inc. 6-1 Work Done by a Constant Force In the SI system, the units of work are joules:

1J=1N m As long as this person does not lift or lower the bag of groceries, he is doing no work on it. The force he exerts has no component in the direction of motion. 2014 Pearson Education, Inc. 6-1 Work Done by a Constant Force Solving work problems: 1. Draw a free-body diagram.

2. Choose a coordinate system. 3. Apply Newtons laws to determine any unknown forces. 4. Find the work done by a specific force. 5. To find the net work, either find the net force and then find the work it does, or find the work done by each force and add. 2014 Pearson Education, Inc. 6-1 Work Done by a Constant Force Work done by forces that oppose the direction of motion,

such as friction, will be negative. Centripetal forces do no work, as they are always perpendicular to the direction of motion. 2014 Pearson Education, Inc. 6-2 Work Done by a Varying Force For a force that varies, the work can be approximated by dividing the distance up into small pieces, finding the work done during each, and adding them up. As the pieces become

very narrow, the work done is the area under the force vs. distance curve. 2014 Pearson Education, Inc. 6-3 Kinetic Energy and the Work-Energy Principle Energy was traditionally defined as the ability to do work. We now know that not all forces are able to do work; however, we are dealing in these chapters with mechanical energy, which does follow this definition.

2014 Pearson Education, Inc. 6-3 Kinetic Energy and the Work-Energy Principle If we write the acceleration in terms of the velocity and the distance, we find that the work done here is (6-2) We define the kinetic energy: (6-3)

2014 Pearson Education, Inc. 6-3 Kinetic Energy and the Work-Energy Principle This means that the work done is equal to the change in the kinetic energy: (6-4) If the net work is positive, the kinetic energy increases.

If the net work is negative, the kinetic energy decreases. 2014 Pearson Education, Inc. 6-3 Kinetic Energy and the Work-Energy Principle Because work and kinetic energy can be equated, they must have the same units: kinetic energy is measured in joules.

2014 Pearson Education, Inc. 6-4 Potential Energy An object can have potential energy by virtue of its surroundings. Familiar examples of potential energy: A wound-up spring A stretched elastic band An object at some height above the ground 2014 Pearson Education, Inc.

6-4 Potential Energy In raising a mass m to a height h, the work done by the external force is (6-5a) We therefore define the gravitational potential energy: (6-6)

2014 Pearson Education, Inc. 6-4 Potential Energy This potential energy can become kinetic energy if the object is dropped. Potential energy is a property of a system as a whole, not just of the object (because it depends on external forces). If PEG = mgy, where do we measure y from? It turns out not to matter, as long as we are consistent about where we choose y = 0. Only changes in potential energy can be measured.

2014 Pearson Education, Inc. 6-4 Potential Energy Potential energy can also be stored in a spring when it is compressed; the figure below shows potential energy yielding kinetic energy. 2014 Pearson Education, Inc. 6-4 Potential Energy

The force required to compress or stretch a spring is: (6-8) where k is called the spring constant, and needs to be measured for each spring. 2014 Pearson Education, Inc.

6-4 Potential Energy The force increases as the spring is stretched or compressed further. We find that the potential energy of the compressed or stretched spring, measured from its equilibrium position, can be written: (6-9) 2014 Pearson Education, Inc. 6-5 Conservative and Nonconservative Forces If friction is present, the work done depends not only on

the starting and ending points, but also on the path taken. Friction is called a nonconservative force. 2014 Pearson Education, Inc. 6-5 Conservative and Nonconservative Forces Potential energy can only be defined for conservative forces. 2014 Pearson Education, Inc.

6-5 Conservative and Nonconservative Forces Therefore, we distinguish between the work done by conservative forces and the work done by nonconservative forces. We find that the work done by nonconservative forces is equal to the total change in kinetic and potential energies: (6-10) 2014 Pearson Education, Inc.

6-6 Mechanical Energy and Its Conservation If there are no nonconservative forces, the sum of the changes in the kinetic energy and in the potential energy is zerothe kinetic and potential energy changes are equal but opposite in sign. This allows us to define the total mechanical energy: E = KE + PE And its conservation: (6-12b)

2014 Pearson Education, Inc. 6-7 Problem Solving Using Conservation of Mechanical Energy In the image on the left, the total mechanical energy is: E = KE + PE = mv2 + mgy The energy buckets on the right of the figure show how the energy moves from all potential

to all kinetic. 2014 Pearson Education, Inc. 6-7 Problem Solving Using Conservation of Mechanical Energy If there is no friction, the speed of a roller coaster will depend only on its height compared to its starting height. 2014 Pearson Education, Inc. 6-7 Problem Solving Using Conservation of

Mechanical Energy For an elastic force, conservation of energy tells us: (6-14) 2014 Pearson Education, Inc. 6-8 Other Forms of Energy and Energy Transformations; the Law of Conservation of Energy Some other forms of energy: Electric energy, nuclear energy, thermal energy,

chemical energy. Work is done when energy is transferred from one object to another. Accounting for all forms of energy, we find that the total energy neither increases nor decreases. Energy as a whole is conserved. 2014 Pearson Education, Inc. 6-9 Energy Conservation with Dissipative Processes; Solving Problems

If there is a nonconservative force such as friction, where do the kinetic and potential energies go? They become heat; the actual temperature rise of the materials involved can be calculated. 2014 Pearson Education, Inc. 6-9 Energy Conservation with Dissipative Processes; Solving Problems Problem solving: 1. Draw a picture.

2. Determine the system for which energy will be conserved. 3. Figure out what you are looking for, and decide on the initial and final positions. 4. Choose a logical reference frame. 5. Apply conservation of energy. 6. Solve. 2014 Pearson Education, Inc. 6-10 Power Power is the rate at which work is done

(6-17) In the SI system, the units of power are watts: 1W = 1 J/s The difference between walking and running up these stairs is power the change in gravitational potential energy is the same. 2014 Pearson Education, Inc.

6-10 Power Power is also needed for acceleration and for moving against the force of gravity. The average power can be written in terms of the force and the average velocity: (6-18) 2014 Pearson Education, Inc. Summary of Chapter 6 Work: W = Fd cos

Kinetic energy is energy of motion: KE = mv2 Potential energy is energy associated with forces that depend on the position or configuration of objects. The net work done on an object equals the change in its kinetic energy. If only conservative forces are acting, mechanical energy is conserved. Power is the rate at which work is done. 2014 Pearson Education, Inc.